Enquire Now

Project Management

End-to-End Solutions

 

Asbestos projects can bring unique challenges and areas of difficulty. Our project managers ensure the whole process runs smoothly, planning for each individual project, taking into consideration the safety, risk, operational requirements and budgetary constraints.

Our experience can save you money, whilst ensuring your project follows all relevant health and safety regulations, operational and programme requirements.

 

Management of survey projects

  • Initial site visit to determine scope of project
  • Desktop review of existing survey information
  • Site meetings with all stakeholders
  • Survey schedule production
  • Site management to ensure projects are delivered on time and in budget
  • Action plan based on survey findings

 

Management of remediation projects

Pre-removal phase:

  • Initial site visit to determine scope of project(s)
  • Production of removal specification document(s)
  • Tender management / review of submissions for competence and financial performance

Removal phase:

  • Pre-start meeting(s)
  • Vetting method statements and plans of work
  • Update meeting(s) – dependent upon duration of project(s)
  • Site management to ensure projects are delivered on time and in budget
  • Production of project completion pack(s), encompassing all elements of the project. This may also be held in the site health & safety file

End-to end solutions to safely manage your asbestos removal projects, on time and on budget.

FAQ

Asbestos is a naturally occurring fibre that was widely used in construction and other industries until the late 1990s. The three types of asbestos fibres most used in the UK are: blue (crocidolite), brown (amosite) and white (chrysotile)

Before its dangers were known, asbestos was often used in buildings for insulation, flooring, roofing, and was sprayed on ceilings and walls. Its use is now banned in the UK, but buildings constructed before the year 2000 may still have asbestos in them. Materials containing asbestos are referred to ‘ACMs’ (asbestos containing materials). Asbestos can also be found in soils, where ACM waste has been disposed.

If asbestos inside buildings remains intact, it poses very little risk. It’s only when it’s damaged or disturbed that tiny asbestos fibres can be released into the air and enter your lungs when breathing. Breathing in asbestos fibres can significantly damage your lungs and their lining.  The symptoms of asbestos-related conditions take many years – even decades – to appear after the original exposure to asbestos. This means that exposure a long time ago might only show up as a condition today.

UK law is very strict about managing ACMs (asbestos containing materials). It is heavily regulated to ensure best practice and safety of anyone who may come into contact with it. The Duty to Manage Asbestos is the responsibility of the Duty Holder and the guidelines are included in the Control of Asbestos Regulations 2012 (CAR 2012). The Regulations set out your legal duties and the ACOP and guidance give practical advice on how to comply with those requirements. Download the CAR 2012 regulations from our resource library. 

The Duty Holder is the owner of the non-domestic premises or the person or organisation that has clear responsibility for the maintenance or repair of non-domestic premises.

The Duty Holder is required to manage the risk from asbestos by:

1. Finding out if there is asbestos in the premises, its location and what condition it is in.
2. Keeping an up-to-date record of the location and condition of the ACMs.
3. Assessing the risk from the material
4. Preparing a detailed plan of how the ACMs risks will be managed
5. Taking steps to put the plan in action
6. Reviewing and monitoring your plan

7.Having a system to inform others about the location and condition of ACMs

There are 2 main types of survey: Asbestos Management Surveys and Asbestos Refurbishment/Demolition Surveys.

A management survey will be required during the normal occupation and use of the building to ensure continued management of the ACMs in situ. As part of your management plan re-inspection surveys will be carried out. These are periodic condition inspections that checks for any deterioration of ACMs caused by natural degradation, accidental damage or poor removal practice.

A refurbishment/demolition survey will be necessary when the building (or part of it) is to be upgraded, refurbished or demolished.

 

Regulation 4, CAR 2012 stipulates that the duty holder manages the risk of from asbestos by finding out if there is asbestos in the premises, its location and what condition it is in. It also allows social housing providers to comply with risk assessments as outlined in Regulation 5, CAR 2012. An asbestos survey will provide sufficient information for: an asbestos register and plan to be prepared, a suitable risk assessment to be carried out and a written plan to manage the risks to be produced.

Every survey is unique, depending on its purpose and the size, usage and lifespan of the premises. We work with our clients to provide a tailored service specific to their needs.  Generally, here’s what to expect during an AEC survey:

Management surveys and Re-inspection surveys are less intrusive than a refurbishment/demolition survey.  The surveyor will use plans/maps of your building to identify the location of suspected ACMs, they will take photographs to show the condition of the materials and record all their findings.  The surveyor will not disturb any suspected asbestos other than take a small representative sample (typically no bigger than 1cm2). In the case of any area being inaccessible the surveyor will record ‘presumed’ asbestos. Any material samples will be securely contained and labelled on site before being transferred to our laboratory for analysis.

Refurbishment and demolition surveys are more intrusive surveys. The surveyor will work alongside your development plans to inspect areas to identify any ACMs that may be disturbed throughout refurbishment works. In the case of demolition, the whole building will be surveyed. The surveyor will access all areas of the building marked for demo/refurbishment (such as floor coverings, above false ceilings, lofts, inside risers, service ducts, lift shafts, underground rooms, and under crofts). This will also involve sampling any areas that were ‘presumed’ asbestos in other less intrusive surveys. The surveyor will not disturb any suspected asbestos other than take a small representative sample (typically no bigger than 1cm2).  Specialist surveyors trained to work at height and in confined spaces will carry out surveys in ‘hard to reach’ areas, and it may involve using specialist access equipment.   Any material samples will be securely contained and labelled on site before being transferred to our laboratory for analysis.

Asbestos air monitoring (also known as asbestos air testing) is a requirement of the Control of Asbestos Regulation (CAR 2012) . Its purpose is to monitor fibre levels during the asbestos removal process or if an ACM has been disturbed. It is essential during asbestos four-stage clearances, leading to a certificate of reoccupation. Analysts use specialist equipment to monitor the air and work in accordance with HSE regulations and guidance HSG 248 ‘The Analysts Guide For Sampling, Analysis and Clearance Procedures’.

Our clients benefit from AEC’s online portal.  Available 24/7 all your records are contained in an easy-to-use management system.  You can view all your sites survey data, risk items and action plans in real time. View AEC’s Client Portal here.   

 

UKAS  is the National Accreditation Body for the United Kingdom. They assess and accredit organisations that provide services including certification, testing, inspection and calibration. UKAS accreditation ensures the highest levels of impartiality and competence through a continuous assessment process. This allows clients to have confidence in the quality of services provided.  View our UKAS accreditations here.

 

 

Testimonial

AEC delivered a great service in helping implement changes to our ventilation systems. As a result of AEC’s indoor air quality monitoring, we were able to make the recommended changes and assess the improvements. We were delighted to have AEC on board in introducing new measures to keep our employees safe at work.

UK Emergency Services Call Centre Manager.

AECs work was carried out in an efficient and highly professional manner, this was carried out in a partnership with SHG where being all items of program, customer involvement and technical advice was shared in weekly meetings. This ensured that all parties from client, customers, removals through to following 3rd party contractors due for follow up works had the information needed for safety and planning.

Mark Harrington, Mechanical Manager

“AEC have been a pleasure to work with. The team have provided a comprehensive site reinspection, carried out their tasks throughout challenging circumstances and provided the Management and Estates Teams with a clear and concise portal system which can be updated in real time as works progress throughout the RBH site. We look forward to working with you in the future.”

 

Health & Safety manager at Bolton NHS Trust

“There was trust and communication from all sides, ensuring our customers’ confidence in us as their housing association was retained throughout the difficult pandemic period, and beyond.”

Amy Greenwood, Customer Safety Coordinator at Stockport Homes

AEC delivered their services professionally and responded to our unique requirements to achieve our goals on time and on budget”.  

Ann-Marie Tooley , Projects Manager, Mid & South Essex NHS Trust

* AEC is UKAS accredited for asbestos surveys, air testing and bulk sample analysis only.

Book your bulk samples in for asbestos testing today

Book In Today
magnifiercrossmenu